1. Home
  2. Products
  3. Water Pump
  4. Deep Well Pump

Deep Well Pump

Centrifugal Deep Well Pump / Ejector Deep Well Pump / Water Pump

    1. Deep Well Pump, DP Series The DP pumps are regarded as one of the best pumps for deep well. In fact they consist of two pumps connected in series, one is ejector-pump and the other is centrifugal pump.
    1. Deep Well Pump, NGM Series The NGM pumps are with one or two impellers. The two impeller pump can gain bigger flow rate. In fact they consist of two pumps connected in series, one is ejector-pump and the other is centrifugal pump.
    1. Deep Well Pump, SP Series Widely used in long distance water delivery irrigation, breeding of high oxygen, deep water extraction, urban and rural water booster, mine water supply or deliver syrup for food and other non corrosive chemical liquid etc.

Deep well pumps are regarded as the best choice for deep wells and deep pumping applications. These pumps consist of two primary types: ejector pumps and centrifugal pumps. An ejector pump is lowered into the well and connected to the centrifugal pump body using two pipes. These water pumps are ideal for pumping clean water and safe chemicals, and are known for their reliability, economical performance and ease of use. These features allow the pumps to have their wide array of usage in domestic applications as well as the automatic distribution of water from small and medium sized surge tanks to form an automatic booster system to supply water. These deep well pumps are best known for the ability to supply clean water from extremely deep wells.

  • No. Description
  • 1. Plug
  • 2. Gasket
  • 3. Bolt
  • 4. Pump body
  • 5. Bolt
  • 6. Partition
  • 7. Straddle trading
  • 8. O-ring
  • 9. Impeller
  • 10. Copper sleeve
  • 11. Rolling mechanical seal
  • 12. Fixed mechanical seal
  • 13. drop guard
  • 14. Front cover
  • 15. Flange gasket
  • 16. Flange
  • 17. Screw
  • 18. Tie-rod
  • 19. Bearing
  • 20. Key
  • 21. Rotor
  • 22. Motor housing with stator
  • 23. Wave-form washer
  • 24. End cover
  • 25. Tie-rod
  • 26. Scrap ring fan
  • 27. Fan scrap ring
  • 28. Fan cover
  • 29. Screw
  • 30. Screw
  • 31. Gasket
  • 32. Terminal box place
  • 33. Terminal box cover
  • 34. Fairlead
  • 35. Cable holder
  • 36. Screw
  • 37. Screw
  • 38. Gasket
  • 39. Terminal block
  • 40. Screw
  • 41. Capacitor
  • 42. Terminal box cover
  • 43. Screw
  • 44. Screw
  • No. Description
  • 1. Plug
  • 2. Gasket
  • 3. Pump body
  • 4. Screw
  • 5. Bolt
  • 6. Impeller
  • 7. Partition
  • 8. Snap ring
  • 9. Gasket
  • 10. Rolling mechanical seal
  • 11. Fixed mechanical seal
  • 12. drop guard
  • 13. Plug
  • 14. Gasket
  • 15. Front cover
  • 16. Bearing
  • 17. Key
  • 18. Rotor
  • 19. Motor housing with stator
  • 20. Support foot
  • 21. Bearing
  • 22. Wave-form washer
  • 23. End cover
  • 24. Tie-rod
  • 25. Fan
  • 26. Fan cover
  • 27. Terminal box place
  • 28. Screw
  • 29. Terminal block
  • 30. Capacitor
  • 31. Screw
  • 32. Screw
  • 33. Terminal box nut
  • 34. Fairlead
  • 35. Cable holder
  • 36. Screw
  • 37. Terminal box cover