1. Home
  2. Products
  3. Water Pump
  4. Peripheral Pump

Peripheral Pump

Peripheral Impeller Pump / Peripheral Water Pump / Economical Water Pump

    1. Peripheral Pump, QB Series The QB series are peripheral pumps, with peripheral impeller containing numerous radial blades in its edge, suitable for pumping clean water and chemically non-aggressive liquid.
    1. Peripheral Pump, KF Series The KF series are peripheral pumps, with peripheral impeller containing numerous radial blades in its edge, suitable for pumping clean water and chemically non-aggressive liquid.
    1. Peripheral Pump, LQ Series The LQ series are peripheral pumps, with peripheral impeller containing numerous radial blades in its edge, suitable for pumping clean water and chemically non-aggressive liquid.
    1. Peripheral Pump, DB Series The DP pumps are regarded as one of the best pumps for deep well. In fact they consist of two pumps connected in series, one is ejector-pump and the other is centrifugal pump.
    1. Peripheral Pump, IDB Series IDB series pumps with peripheral impeller are able to offer high pressure in relation to comparatively low power and which have particularly steady operating curves.
    1. Peripheral Pump, PM16 Series PM16 series pumps with peripheral impeller are able to offer high pressure in relation to comparatively low powers and which have particularly steady operating curves.

This series of peripheral pumps contain peripheral impellers that contain numerous radial blades on the edge. The shape of the blades quickly transfers radial re-circulation motion rapidly to the fluid upon entry to the pump. Between the impeller blades and the double channel machined into the side of the pump body, each blade assists in the transfer of energy. The fluid pressure increases progressively, and gains a high pressure relative and steep curves. Each pump has different appearances and motor shells based on different operating requirements. They are reliable, economical and simple to use.

  • No. Description
  • 1. Plug
  • 2. Gasket
  • 3. Screw
  • 4. Pump body
  • 5. Impeller
  • 6. Snap ring
  • 7. Gasket
  • 8. Rolling mechanical seal
  • 9. Fixed mechanical seal
  • 10. drop guard
  • 11. O-ring
  • 12. Front cover
  • 13. Bearing
  • 14. Key
  • 15. Rotor
  • 16. Motor housing with stator
  • 17. Wave-form washer
  • 18. Tie-rod
  • 19. End cover
  • 20. Fan
  • 21. Fan cover
  • 22. Terminal box place
  • 23. Terminal box nut
  • 24. Fairlead
  • 25. Cable holder
  • 26. Screw
  • 27. Screw
  • 28. Terminal block
  • 29. Screw
  • 30. Screw
  • 31. Capacitor
  • 32. Terminal box cover