1. Home
  2. Products
  3. Water Pump
  4. Centrifugal Pump

Centrifugal Pump

Electrical Impeller Close Coupled Centrifugal Pump / Overhang Impeller Centrifugal Pump / Liquid Pump

    2. Centrifugal Pump, CPM Series The CPM series pumps are high-efficient, power-saving and compact in structure, convenient to operate and maintain. The hydraulic characteristic is with high head and small capacity.
    2. Centrifugal Pump, SCM2 Series The SCM2 series are with two back-to-back impellers centrifugal pumps, are developed for higher head valve than single impeller pumps and have extremely high outputs.
    2. Centrifugal Pump, HF Series The HF series pumps are specifically designed to achieve high delivery rates with low to medium heads for industrial and agricultural uses. Their volute impeller makes it able to pump water that is even fairly dirty.
    2. Centrifugal Pump, DK Series The DK series pumps are recommended for pumping clean water and chemically non-aggressive liquid. They have compact size and are extremely reliable, very simple to use, efficient and almost maintenance-free.
    2. Centrifugal Pump, CM Series CM Series centrifugal pumps with single impeller are able to offer high flow rates, provide smooth, nonpulsating delivery, and regulate the flow rate over a wide range without damaging the pump.
    2. Centrifugal Pump, S200 Series S200 series centrifugal pumps with single impeller are able to offer high flow rates, provide smooth, nonpulsating delivery, and regulate the flow rate over a wide range without damaging the pump.

The series of electrical impeller close coupled centrifugal pumps are fitted with an overhang impeller directly attached to the motor shaft using a splined keyway. The liquid pumped is conveyed into the spiral volute of the pump body, transforming kinetic energy into dynamic pressure energy. The pressure and flow is achieved with a minimum loss using a hydrodynamic closed impeller design.

  • No. Description
  • 1. Plug
  • 2. Gasket
  • 3. Pump body
  • 4. Plug
  • 5. Gasket
  • 6. Bolt
  • 7. Impeller
  • 8. Snap ring
  • 9. Rolling mechanical seal
  • 10. Fixed mechanical seal
  • 11. O-ring
  • 12. drop guard
  • 13. Front cover
  • 14. Screw
  • 15. Bearing
  • 16. Key
  • 17. Rotor
  • 18. Motor housing with stator
  • 19. Support foot
  • 20. Wave-form washer
  • 21. End cover
  • 22. Tie-rod
  • 23. Fan
  • 24. Fan cover
  • 25. Terminal box place
  • 26. Screw
  • 27. Terminal box nut
  • 28. Fairlead
  • 29. Cable holder
  • 30. Screw
  • 31. Screw
  • 32. Terminal block
  • 33. Screw
  • 34. Capacitor
  • 35. Terminal box cover
  • No. Description
  • 1. Plug
  • 2. Gasket
  • 3. Pump body
  • 4. Screw
  • 5. Bolt
  • 6. Impeller
  • 7. Partition
  • 8. Snap ring
  • 9. Gasket
  • 10. Rolling mechanical seal
  • 11. Fixed mechanical seal
  • 12. drop guard
  • 13. Plug
  • 14. Gasket
  • 15. Front cover
  • 16. Bearing
  • 17. Key
  • 18. Rotor
  • 19. Motor housing with stator
  • 20. Support foot
  • 21. Bearing
  • 22. Wave-form washer
  • 23. End cover
  • 24. Tie-rod
  • 25. Fan
  • 26. Fan cover
  • 27. Terminal box nut
  • 28. Screw
  • 29. Terminal block
  • 30. Capacitor
  • 31. Screw
  • 32. Screw
  • 33. Terminal box nut
  • 34. Fairlead
  • 35. Cable holder
  • 36. Screw
  • 37. Terminal box cover